Flushaway Diverter Installation

HOW EASY IS IT TO FIX THE FLUSHAWAY® INTO THE ROOF GUTTERING OR DOWNPIPES

When fixing into guttering you can use an 80ml hole saw to cut the hole out where you want to fix it then use the FLUSHAWAY® flange as a template to mark out the 4 holes, drill the holes, place a bead of silicon around the silicon ring on the top of the flange hold in place over drilled holes and rivett to completion, jobs done.

FIXING INTO A DOWNPIPE

You can do the same way as for the guttering or you can hold the flange of the FLUSHAWAY® on the downpipe offset, where you want to fix it and use it as a template marking out the 80mil hole and the 4 rivett holes drill or punch a hole to the centre of the 80mil marked hole then simply cut out with tin snips within the mark, drill the 4 holes, place a bead of silicon around the silicon ring hold in place and rivett to completion, jobs done. Either job should take no longer than ten minutes per FLUSHAWAY®